凹凸棒黏土脱硫剂脱除3-甲基噻吩的实验研究  

Experimental Study on the Attapulgite Desulfurizer for the Removal of 3-Methylthiophene

作　　者：王青宁[1] 焦林宏[1] 李澜[1] 陈静[2] 韩维亮[1] 

机构地区：[1]兰州理工大学石油化工学院,甘肃兰州730050 [2]淮阴工学院生命科学与化学工程学院江苏省凹土资源利用重点实验室,江苏淮安223003

出　　处：《石油学报（石油加工）》2013年第1期40-45,共6页Acta Petrolei Sinica(Petroleum Processing Section)

基　　金：甘肃省攻关基金(2GSO47-A52-001-05);江苏省凹土资源利用重点实验室开放研究基金项目(HPK201104)资助

摘　　要：选用经分散剂六偏磷酸钠提纯、硝酸处理的凹凸棒黏土为载体,采用浸渍法负载Fe系和Ag系化合物,制备凹凸棒黏土脱硫剂,用于含3-甲基噻吩的模拟汽油的脱硫。通过正交实验进行脱硫剂制备条件的优化。结果表明,在Fe系化合物质量分数5%、Ag系化合物质量分数0.5%、400℃焙烧4.5h的条件下制备的凹凸棒黏土脱硫剂,在常温常压条件下,使模拟汽油硫质量分数从500μg/g降至约191μg/g,脱硫率达到61.8%。The attapulgite desulfurizer was prepared by the impregnation technique, in which the transitional metal Fe and Ag compounds were used as active components and attapulgite was purified by sodium hexametahposphate and treated by nitric acid before preparation. The attapulgite desulfurizer was used to the desulfurization of model gasoline containing 3-methylthiophene. The optimal conditions of the desulfurizer preparation were obtained by orthogonal method. The results showed that with 5% Fe compound and 0. 5% Ag compound as active components, under the conditions of 400℃ calcination temperature and 4.5 h calcination time, the attapulgite desulfurizer with best desulfurization performance was obtained, with which the sulfur mass fraction in model gasoline was reduced from 500μg/g to about 191 μg/g under normal temperature and pressure and the desulfurization rate was 61.8%.

关 键 词：凹凸棒黏土 脱硫 3-甲基噻吩 

分 类 号：TE992.1[石油与天然气工程—石油机械设备]