丝网印刷制备适用于AC-PDP的LaB_6介质保护层的研究  

The Characteristics of Screened LaB_6 Functional Layer in AC-PDP

作　　者：杜螣杰 林祖伦[1] 王小菊[1] 

机构地区：[1]电子科技大学光电信息学院,成都610054

出　　处：《电子器件》2013年第1期9-12,共4页Chinese Journal of Electron Devices

基　　金：项目来源:用于AC-PDP的新型复合放电材料研究(ZYGX2010J062)

摘　　要：为了进一步降低PDP面板着火电压,提高其放电效率,采用丝网印刷方法在商用PDP玻璃衬底上印刷LaB6薄膜。分别对PDP玻璃衬底上印刷的LaB6薄膜的可见光范围内的透过率、薄膜表面形貌进行了研究;对印刷了LaB6薄膜的PDP玻璃衬底进行了封装,测试了其在Xe-Ne环境下的放电特性。结果表明,印刷了LaB6作为添加层的放电单元相比传统单一MgO保护层的放电单元,其着火电压和放电延迟分别降低了5%和25%。说明采用高二次电子发射系数的六硼化镧材料能够有效提升PDP的放电性能。The lanthanum hexaboride （ LaB6 ） thin film was deposited on PDP-glass substrate by the method of Screen- Printing. The transparent rate and surface appearance of the LaB6 film were analysed throughout by the Spectrophotomether and Scanning Electron Microscope （SEM） measurements. A test model, in which the LaB6 film functional layer was applied was made, for measurements of the fire voltage and build-up time. The measurements showed that the LaB6 functional layer makes the fire voltage and the build-up time respectively reduce 5% and 25%, which raised the high secondary electron emission coefficient and improved the discharge property of PDP.

关 键 词：AC-PDP 着火电压 丝网印刷 六硼化镧 透过率 放电延迟 

分 类 号：TN304[电子电信—物理电子学]