β晶型成核剂改性嵌段共聚聚丙烯(PP-B)管材料研究  

Study on modification of blockcopolymeric polypropylene pipe byβ-nucleator

作　　者：鲍光复[1] 

机构地区：[1]中国石化扬子石油化工有限公司南京研究院,江苏南京210048

出　　处：《化学工业与工程技术》2013年第1期28-31,共4页Journal of Chemical Industry & Engineering

摘　　要：实验研究了2种类型的β晶型成核剂对嵌段共聚聚丙烯(PP-B)管材料韧性、刚性以及热变形温度的影响,并对改性前后材料的结晶行为进行对比分析,验证了球晶转变的发生并探讨了β晶型球晶的增韧机理。结果表明,由于β晶型成核剂的加入,材料中生成了大量的β晶,α晶的数量大为减少。β晶的大量生成是材料冲击强度提高的内在原因。The influence of two kinds of β-nucleator on the toughness, rigidness and thermal deformation temperature of blockco- polymeric polypropylene （PP-B） pipe is studied in laboratory. The crystallization behavior before and after modification is compared and analyzed, the sphaerocrystal change is tested and verified, and the toughening mechanism of β-sphaeroerystal is discussed. The results show that the quantity offl-sphaerocrystal increases greatly while a-sphaerocrystal reduces due to addition of r-nucleator. The quantity of β-sphaerocrystal increases greatly is regarded as the immanent cause to enhance the impact strength of the material.

关 键 词：Β晶型成核剂 改性 嵌段共聚聚丙烯 管材料 

分 类 号：TQ325.14[化学工程—合成树脂塑料工业]