NaCl、NaBr对HPG压裂液性能的影响  被引量:4

Effect of NaCl and NaBr on the Performance of HPG Fracturing Fluid

在线阅读下载全文

作  者:肖兵[1] 张高群[1] 陈波[1] 胡娅娅[1] 曹凯[1] 武玉东[1] 栾飞[1] 

机构地区:[1]中原油田井下特种作业处,河南濮阳457164

出  处:《油田化学》2013年第1期26-28,共3页Oilfield Chemistry

摘  要:随着国内外深井、高压井、高应力井储层的压裂改造,压裂液加重已成为降低压裂施工压力的必要措施,常用的加重剂为NaCl、NaBr等无机盐。室内研究了NaCl、NaBr对压裂液性能的影响。结果表明,加重之后压裂液黏度升高,并呈指数上升趋势;压裂液耐温耐剪切能力提高,14%NaCl、14%NaBr加重压裂液在130℃、170 s^(-1)连续剪切120 min后的黏度分别约为200 mPa·s和300 mPa·s,而非加重压裂液剪切70 min后的黏度在100 mPa·s以下;加重压裂液高温滤失降低,黏弹性略有降低。加重后,压裂液破胶相对困难,所需破胶剂量增大。125℃时,30%NaBr压裂液需0.3%APS以上剂量才能达到非加重压裂液加入0.05%APS的效果。低剪切速率下,加重后压裂液的摩擦压降相对偏高;但随剪切速率增大,摩擦压降有低于非加重压裂液的趋势。With the fracturing treatment of deep wells and high-pressure wells at home and abroad, weighting of fracturing fluid had become the necessary measures of reducing pressure in fracturing operation. And the commonly aggravating materials were inorganic salt, such as NaC1 and NaBr. The effect of NaC1 and NaBr on the properties of fracturing fluid was studied. The results showed that the viscosity of fracturing fluid increased exponentially after inorganic salt added. The fluid capability of temperature-resisting and shear resistance raised. The viscosity of fracturing fluid contained 14% NaC1 and 14% NaBr was about 200 mPa. s and 300 mPa. s respectively with 130℃ temperature, 170 s^-1 shear rate and 120 min shear time. However, that of non-aggravating fracturing fluid dropped to 100 mPa's after 70 min. Inorganic salt could reduce the fracturing fluid loss at high temperature, but would lower its viscoelastic. After aggravating, gel breaking became relatively difficult and the gel breaking dose increased. The effect of 30% NaBr fracturing fluid mixing 0. 3% APS above could equal to that of non-aggravating fracturing fluid mixing 0.05% APS at 125℃. In low shear rate, the friction of aggravating fracturing fluid was on the high side relatively. But with increasing shear rate, the friction of aggravating fracturing fluid would lower than that of non-aggravating fracturing fluid.

关 键 词:NACL NABR 羟丙基瓜尔胶 压裂液 性能 

分 类 号:TE357.12[石油与天然气工程—油气田开发工程]

 

参考文献:

正在载入数据...

 

二级参考文献:

正在载入数据...

 

耦合文献:

正在载入数据...

 

引证文献:

正在载入数据...

 

二级引证文献:

正在载入数据...

 

同被引文献:

正在载入数据...

 

相关期刊文献:

正在载入数据...

相关的主题
相关的作者对象
相关的机构对象