基于C/S模式的成像测井仪器调试台架软件系统研制  

Development of the Test-bench Software System for Imaging Logging Tool Based on the C/S Mode

作　　者：杨喜峰[1,2] 鞠晓东[1] 吴文河[1] 

机构地区：[1]中国石油大学油气资源与探测国家重点实验室,北京102249 [2]中国石油大学(华东)理学院,青岛266580

出　　处：《科学技术与工程》2013年第7期1936-1940,1956,共6页Science Technology and Engineering

基　　金：国家"863"项目(2006AA060702)资助

摘　　要：根据微电阻率扫描测井仪调试台架软件功能需求,在对比C/S和B/S两种通讯模式基础上,确定基于C/S模式的软件通讯结构。为提高调试台架软件的可移植和扩展性,引入相应软件技术:前端机通过内核模块方法和多线程技术实现驱动程序动态管理和功能模块独立;上位机中采用MDI软件框架和组件技术实现结构开放和功能独立。微电阻率扫描测井仪调试台架软件系统设计结构扩展性强,组件功能可复用性强,方便移植到同类调试台架。According to demand of the Micro-resistivity canning tool test-bench software demand, C/S and B/S two kinds of communication modes are contrasted, then confirms the software communication structure based on C/ S mode. In order to improve the portability and expansibility of the test-bench software, the corresponding software technology is introduced： front end machine realizes driver dynamic management and the independent function through the kernel modules method and muhithread technology, main machine brings about the opening up of soft- ware structure and independent function through the MDI software framework and component technology. Based on the micro-resistivity scanning tool test-bench software system of above software technology has stronger portability and scalability, can easily transplant to other test- bench.

关 键 词：微电阻率扫描 测井仪器 调试台架 MDI组件 

分 类 号：TE132.14[石油与天然气工程—油气勘探] TP391.1[自动化与计算机技术—计算机应用技术]