加压串行流化床制取生物质合成气的模拟  

Simulation of Bio-syngas Production from Biomass Gasification via Pressurized Interconnected Fluidized Beds

作　　者：冯飞[1,2] 宋国辉[1] 沈来宏[1] 肖军[1] 张蕾[2] 

机构地区：[1]东南大学能源与环境学院,南京210096 [2]南京化工职业技术学院机械技术系,南京210048

出　　处：《农业机械学报》2013年第3期129-136,共8页Transactions of the Chinese Society for Agricultural Machinery

基　　金：国家重点基础研究发展计划(973计划)资助项目(2010CB732206)

摘　　要：利用Aspen Plus软件建立了加压串行流化床生物质气化过程的模型,并将模拟数值与试验结果相比较,验证了模拟研究的可行性。分别研究了气化温度Tg、气化压力pg以及水蒸气与生物质的质量比(S/B)对生物质合成气的成分、氢碳比、气化份额、生物质合成气产率和生物质碳转化率等的影响。结果表明气化温度、气化压力和S/B对生物质气化过程有很重要的影响,适当地提高气化温度和气化压力对制取生物质合成气有利(Tg在800℃左右,pg在0.4 MPa左右),合适的S/B在0.4左右。With Aspen Plus software, the simulation of the whole process of bio-syngas production from gasification via pressurized interconnected fluidized beds was carried out, and the model was validated by the comparison of simulation results and experimental results. The effects of gasification temperature （Ts）, gasification pressure （pg） and steam to biomass ratio （S/B） on bio-syngas composition, H2/CO ratio, gasification proportion, bio-syngas yield, and carbon conversion were studied. The results showed that gasification temperature, gasification pressure and S/B had great influences on the biomass gasification process and the suitable gasification temperature and pressure was around 800℃ and 0.4 MPa.

关 键 词：串行流化床 加压 生物质合成气 模拟 

分 类 号：TK6[动力工程及工程热物理—生物能]