淤浆床法合成丁炔二醇的催化剂研究  

Study on Catalyst for Synthesis of 1,4-Butynediol by Slurry Bed

作　　者：蔡锦[1] 张晓凤[1] 黄秋锋[1] 林深[1] 

机构地区：[1]福建师范大学化学与化工学院,福州350108

出　　处：《材料导报》2013年第4期82-85,共4页Materials Reports

基　　金：国家自然科学基金(21103022);福建省自然科学基金(2011J05019);福建省教育厅A类项目(JA11063)

摘　　要：用浸渍法混合负载制备了一种分子筛负载复合氧化物催化剂CuO/Bi2O3/ZSM-5,并探讨了催化剂的制备条件与反应条件对催化甲醛乙炔化生成1,4-丁炔二醇反应的催化活性的影响。实验结果表明,CuO/Bi2O3/ZSM-5催化剂用于甲醛乙炔化反应的适宜的反应条件是:常压、363K,催化剂用量为5g催化剂每50mL甲醛溶液(初始浓度为37%),乙炔空速0.14～0.16s-1,反应24h。在此条件下,丁炔二醇得率为89%～92%,选择性为96%左右,副产物丙炔醇得率约为2%。The molecule sieve-support complex oxide （CuO/BizO3/ZSM 5） catalyst was prepared by impregna- tion. The effect of preparation and reaction conditions on ethynylation of formaldehyde was investigated. Results show that under the optimum conditions of reaction temperature 363 K, atmospheric pressure, CuO/Biz 03/ZSM-5 catalyst 5 g per 50 mL formaldehyde solution, space velocity of acetylene 0.14-- 0.16s^1, and reaction time 24 h, the yield and selectivity of butynediol could reach 89%--92% and 96%, respectively, and the yield of byproduct propargyl alcohol is about 2%.

关 键 词：丁炔二醇 复合氧化物 ZSM-5 乙炔化 淤浆床 

分 类 号：O643[理学—物理化学]