高锰铝Fe-26Mn-6Al-C钢组织性能研究  

Study on Microstructure and Properties of High Manganese Aluminum SIP Steel

作　　者：何刚 荆涛[2] 孟伟[3] 阎培泽[2] 赵瑛珺[3] 

机构地区：[1]辽宁冶金职业技术学院,辽宁本溪117022 [2]本溪钢铁集团公司质量管理中心,辽宁本溪117000 [3]本溪钢铁集团公司热连轧厂,辽宁本溪117000

出　　处：《精密成形工程》2013年第2期40-43,共4页Journal of Netshape Forming Engineering

摘　　要：研究的Fe-26Mn-6Al-C钢是在TRIP钢和TWIP钢研究的基础上,开发的锰和铝含量更高的钢种,具有层错能较高、质量更轻、强度高等优点,应用于汽车行业中可节能减重,降低成本,且安全性好,应用前景广阔。研究了高锰铝Fe-26Mn-6Al-C钢的成分,还研究了轧型高锰Fe-Mn-Al-C低密度高强钢,即Fe-26Mn-6Al-C钢的微观组织,并测定了试验钢在热轧后、固溶处理后以及时效处理后在室温环境下的拉伸力学性能,观察了不同状态下的微观组织以及变形后的微观组织。还研究了Fe-26Mn-6Al-C钢的时效硬化行为。The chemical compositions of Fe-26Mn-6Al-C steel are based on TIRP steel and TWIP steel, but it has a higher con- tent of manganese and aluminum. With the high stacking fault energy and high strength, this steel can be applied to automobile indus- try to improve fuel economy and security, yet reduce automobile body weight and costs, and has wide prospect of application. The chemical compositions and microstructure of Fe-26Mn-6Al-C steel are studied. The tensile mechanical properties of the test Fe-26Mn- 6Al-C steel after hot-rolling, solution treatment and aging treatment at room temperature are tested. And the microstructures of the steel under different conditions and deformations are observed. The age-hardening behavior of Fe-26Mn-6Al-C steel is studied.

关 键 词：热轧 Fe-26Mn-6Al-C 组织性能 

分 类 号：TG335.11[金属学及工艺—金属压力加工]