检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
出 处:《工业建筑》2013年第3期125-128,共4页Industrial Construction
基 金:新疆自治区科技攻关项目(G101310001)
摘 要:通过对高宽比为0.7和1.75的4片墙体进行拟静力试验,研究单面格构式钢板加固砖砌体墙后,墙体的破坏特征以及承载力、变形性能等抗震性能的改善情况。其中2片为对比墙,另2片为单面格构式钢板加固墙体。试验结果表明:单面格构式钢板加固砖墙后,高宽比为0.7的墙体承载力提高约50%,高宽比为1.75的墙体承载力基本没有提高,加固后墙体的变形性能得到了较大的提高。Pseudo-static test of four walls with aspect ratio of 0. 7 and 1.75 was carried out to study the improvement of seismic performance of sided latticed steel plate reinforced brick masonry wall, the wall failure characteristics and bearing capacity and deformation properties. Of which 2 walls were the reference ones, and the other two were sided lattice steel plate reinforced walls. The experimental results showed that the bearing capacity of side latticed steel plate reinforced brick wall of 0. 7 aspect ratio increased by about 50% , basically no increase in wall bearing capacity of 1.75 aspect ratio, the deformation properties of reinforced wall were greatly improved.
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.174