8011H16铝合金瓶盖料生产工艺研究  

Study on Production Process of 8011H16 Aluminum Alloy for Bottle Cap

作　　者：李响 高晓玲 林顺岩 喻彬 杨光胜 

机构地区：[1]西南铝业(集团)有限责任公司,重庆九龙坡401326

出　　处：《铝加工》2013年第1期14-17,共4页Aluminium Fabrication

摘　　要：分析研究了8011铝合金主要合金元素的作用及相互影响,采用小试验研究和大生产相结合的方法,研究了合金中间退火工艺和冷加工率对合金综合性能的影响,并对影响合金性能的机理进行了探讨。结果表明:合理控制合金中Fe、Si含量及配比,采用320℃的中间退火和52%最后道次冷加工率,可获得综合性能优良的8011H16铝合金瓶盖材料。The effects and relationship among the main elements in 6061 aluminum alloy were analyzed. The effect of intermediate annealing and cold deformation on the overall performances of the alloy was discussed. The result showed that 8011H 16 aluminum alloy for bottle cap with good combination properties can be obtained by adjusting the contents and ratio of Fe, Si, adopting intermediate annealing at 320℃and final pass cold rolling reduction of 52%.

关 键 词：8011铝合金 制耳率 烘烤性能 

分 类 号：TB48[一般工业技术—包装工程] TH162[机械工程—机械制造及自动化]