多层橡胶片材层叠复合表面压延质量分析及改善措施  

Quality Analysis and Improvement Methods of Surface of Multi-layered Rubber Composite Sheet

作　　者：秦柳[1] 丁玉梅[1] 杨卫民[1] 

机构地区：[1]北京化工大学高分子材料先进制造英蓝实验室,北京100029

出　　处：《橡胶工业》2013年第3期177-179,共3页China Rubber Industry

摘　　要：根据多层橡胶片材层叠复合的原理,分析采用压延工艺制备出的复合片材表面出现不平整、不均匀,产生皱纹、鱼鳞纹的现象,提出相应的解决措施。试验得出,压延机辊筒温度为100℃、辊速为24m.min-1时,压延的复合片材表面质量较好。Based on the lamination principle of multi-layered rubber composite sheet, the root cau ses for unevenness, non-uniform, wrinkle and ripple on the surface of the composite sheet were ana lyzed,and the improvement methods were proposed. By precisely controlling calendering process,set tingthe roller temperature at 100 ℃and the speed at 24 m. min ^-1,the surface quality of the calen dered composite sheet was improved.

关 键 词：橡胶 多层复合 压延 表面质量 

分 类 号：TQ330.64[化学工程—橡胶工业] TQ336.42