动态热机械分析技术在ATPU/E—44树脂研究中的应用  

Application of dynamic mechanical thermal analysis for study of ATPU/E-44 resins

作　　者：陈文怡[1] 胡明 

机构地区：[1]武汉理工大学材料研究与测试中心,武汉430070 [2]贵州天义电梯成套设备有限公司,遵义563000

出　　处：《分析仪器》2013年第2期19-22,共4页Analytical Instrumentation

基　　金：湖北省自然科学基金项目(2008CDB268)

摘　　要：采用动态热机械方法研究了ATPU固化剂种类、用量和固化温度对ATPU/E—44体系固化产物动态热机械性能的影响。结果表明,利用同时含有刚性介晶单元和柔性链的ATPU作为固化剂,E—44固化产物可以很容易地实现玻璃化转变温度和储存模量的同时剪裁;ATPU/E—44体系固化产物均存在一个最佳ATPU含量,较高的固化温度有利获得较优的热机械性能;ATPU—2具有更好的增韧改性作用,可以获得更高的玻璃化转变温度,但ATPU—1.5有助于获得更高的储存模量。Effects of type and content of amine-terminated polyurethane （ATPU） and curing temperature on mechanical thermal properties of the cured product of ATPU/Epoxy-44 resins have been investigated with dynamic mechanical thermal analysis （DMA） in the paper. The results showed that the cured product of ATPU/Epoxy-44 resins may easily realize synchronously to tailor the glass transition temperature and elastic modulus if ATPU with rigid sub-crystal unit and flexible chain is used as curing agent. There is an optimal value of ATPU content for the cured product of ATPU/Epoxy-44 resins with the highest glass transition temperature. Increasing the curing temperature may improve the mechanical thermal properties of the cured product. ATPU-2 has better toughening modification effect than ATPU-1.5 and may use to increase the glass transition temperature. ATPU-1.5 may use to enhance the elastic modulus.

关 键 词：动态热机械分析 端胺基聚氨酯ATPU 环氧树脂E-44 动态热机械性能 

分 类 号：TQ320.77[化学工程—合成树脂塑料工业]