检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:贾忠伟[1] 杨清彦[1] 侯战捷[1] 董大鹏[1] 袁敏[1]
机构地区:[1]大庆油田有限责任公司勘探开发研究院,黑龙江大庆163712
出 处:《大庆石油地质与开发》2013年第2期106-109,共4页Petroleum Geology & Oilfield Development in Daqing
基 金:中国石油天然气股份有限公司科技重大专项(2008E-1216)
摘 要:通过室内实验评价了三类油层三元复合驱注入能力、提高采收率幅度及化学剂吸附损失程度。结果表明:三类油层三元复合驱可比水驱提高采收率16.93%;在有效渗透率30×10^(-3)μm^2以上的油层三元复合体系能够实现正常注入,三类油层的碱敏性不会对油层产生严重的伤害;与一、二类油层相比,三类油层聚合物的吸附量相近,表面活性剂的吸附量增加约20%,三元复合驱时需要考虑表面活性剂吸附损失的影响。根据实验结果及驱油机理分析,认为三元复合驱应用于三类油层是可行的。By the laboratory experiments, the injectivity and EOR range of ASP flooding and moreover the adsorption loss of chemicals for Class m oil reservoirs are evaluated. The results show that the ASP EOR is more than 16.93% than that of water flooding. ASP system can be injected normally in those oil reservoirs of which effective permeability is more than 30×10-3μm , the alkali sensitivity cannot cause bad damage to the oil reservoirs. Comparing with Class I and II oil reservoirs, the adsorption amount of the polymer in Class m reservoirs is nearly the same, but the adsorption amount of the surfactant increases by about 20%, so the adsorption loss of the surfactant should be considered in ASP flooding. From the experimental results and oil displacing mechanism, it is feasible for ASP flooding in Class m oil reservoirs.
关 键 词:三类油层 三元复合驱 驱油效率 注入能力 吸附 可行性
分 类 号:TE34[石油与天然气工程—油气田开发工程]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.4