高功率固体激光驱动器污染控制及片状放大器洁净度改进  

Contamination control for high-power solid-state laser driver and improvement of cleanliness in slab amplifiers

作　　者：程晓锋[1] 王洪彬[1] 苗心向[1] 秦朗[1] 叶亚云[1] 陈远斌[1] 吕海兵[1] 熊迁[1] 贺群[1] 马志强[1] 赵龙彪[1] 刘勇[1] 贺少勃[1] 袁晓东[1] 朱启华[1] 景峰[1] 郑万国[1] 

机构地区：[1]中国工程物理研究院激光聚变研究中心,四川绵阳621900

出　　处：《强激光与粒子束》2013年第5期1147-1151,共5页High Power Laser and Particle Beams

基　　金：国家高技术发展计划项目

摘　　要：针对高功率固体激光驱动器的安全运行,提出了覆盖驱动器建设全过程的污染控制方法,详细介绍了洁净清洗、洁净检测、洁净保护等保障污染控制效果的技术手段,并介绍了神光-Ⅲ主机装置片状放大器洁净度提升所采取的技术途径,以及片状放大器光照清洗实验中气溶胶等级随闪光灯照射次数的变化情况。实验结果表明,神光-Ⅲ主机装置的洁净水平与美国国家点火装置(NIF)接近且优于其他同类装置,洁净度的大幅提升为装置的安全运行提供了有力保障。The contamination control method covering the whole process of laser driver construction is proposed to ensure the safe operation of high-power solid-state laser driver. The technical means for improving cleanliness level including high pres- sure washing, cleanliness detection and protection are described, and a technical approach is proposed for improving cleanliness of the slab amplifiers of SG-Ⅲlaser driver. The illuminating cleaning experiment by flashlamp light is introduced. The results indi- cate that the cleanliness of SG-Ⅲ laser driver is close to NIF, and better than other similar devices.

关 键 词：固体激光驱动器 片状放大器 洁净度 污染控制 

分 类 号：TN244[电子电信—物理电子学]