Ka波段高功率斜角弯头的设计  

Design of Ka-band high power miter bend

作　　者：吴泽威[1] 李浩[1] 徐建华[1] 李家胤[1] 

机构地区：[1]电子科技大学物理电子学院,成都610054

出　　处：《强激光与粒子束》2013年第5期1211-1214,共4页High Power Laser and Particle Beams

基　　金：高功率微波技术重点实验室基金项目(2012-LHWJJ001);中央高校基本科研业务专项基金项目(103.1.2E022050205)

摘　　要：介绍了一种基于准光技术的高功率斜角弯头的设计方法,可实现圆波导TE0m模式的高效转弯传输。使用模式变换器将工作模式TE0m转换成锥形高斯模,经过转弯后,锥形高斯模被重新转换成工作模式。这种锥形高斯模可以减少波束在镜面的衍射,从而实现工作模式的高效率转弯传输。基于这一方法,设计了工作在Ka波段、工作模式TE01的MW级波导斜角弯头。HFSS计算结果表明:在8%的带宽内,传输效率大于98%。A method based on quasi-optical technology is presented for designing high power miter bend. It can realize high efficiency transmission in bend circular waveguide for TE0,, mode. A conical Gaussian mode is generated from the propagated mode TE0,,, with the help of mode converter and then converted back to the propagated mode TE0,, after the bend. Efficient trans mission of the propagated mode is achieved since the conical Gaussian mode could decrease the diffraction losses at the mirror. A megawatt, TE0 mode miter bend with an operating frequency at Ka band is designed with this method. The HFSS results show that the transmission efficiency higher than 98 is obtained in the frequency band of 6.5 .

关 键 词：高功率微波 过模波导 斜角弯头 准光技术 

分 类 号：TN1[电子电信—物理电子学]