掘进工作面瓦斯涌出预警传感器布置位置探讨  

Discussion of layout position of gas emission warning sensor in heading face

作　　者：邹云龙[1,2] 邓敢搏 张庆华[1,2] 赵旭生[1,2] 

机构地区：[1]瓦斯灾害监控与应急技术国家重点实验室,重庆400037 [2]中煤科工集团重庆研究院,重庆400037

出　　处：《工矿自动化》2013年第4期44-47,共4页Journal Of Mine Automation

基　　金：国家重点基础研究发展计划(973计划)项目(2012CB724206);"十二.五"国家科技支撑计划项目(2012BAK04B01)

摘　　要：针对矿井现有瓦斯传感器布置主要为瓦斯爆炸、瓦斯积聚等灾害监测而布置,而非为监测工作面瓦斯涌出特征而布置的情况,探讨了一种工作面瓦斯传感器的位置布置方案。试验结果表明,将传感器布置在距离工作面5m左右的距离,其监控数据较为符合工作面真实的瓦斯涌出情况,满足监测工作面瓦斯涌出特征的需要;矿井现有的掘进工作面迎头瓦斯传感器布置方式能满足监测工作面瓦斯涌出特征的需要。For situation that existing mine gas sensor is mainly used for monitoring disasters of gas explosion and gas accumulation,and not for monitoring gas emission characteristics of working face,the paper discussed a kind of layout scheme of gas sensor.The test results show that the sensors lay out 5 m distance far from the working face,the monitoring data conform to the real gas emission monitoring of working face,and meet needs of monitoring gas emission characteristics.Current arrangement of gas sensor on head-on of heading face can meet needs of monitoring gas emission characteristics.

关 键 词：掘进工作面 瓦斯涌出 突出预警 瓦斯传感器 布置位置 

分 类 号：TD712[矿业工程—矿井通风与安全]