MBR工艺优化改造工程设计  

DESIGN OF THE OPTIMIZATION PROJECT OF MBR PROCESS

作　　者：葛诚[1] 张万里[1] 周铭威 程文[1] 蒋岚岚[1] 沈晓铃[1] 

机构地区：[1]无锡市政设计研究院有限公司,214072 [2]无锡市高新水务有限公司,江苏无锡214028

出　　处：《水处理技术》2013年第4期128-130,134,共4页Technology of Water Treatment

摘　　要：随着进厂污水量的增加无锡市某污水厂需扩建3×104m3/d,采用MBR工艺,在现有建构筑物的基础上实施,通过一定的改造优化MBR工艺的运行效果,处理水水质优于城镇污水处理厂污染物排放标准(GB 18918-2002)一级A标准。本文详述了该工程的设计思路、设计参数及其设计特点。MBR process is used in the optimization project ofa wastewater treatment plant in Wuxi city with design capacity of3×10^4 m3/d. This project is built on the basis of the existing structures to optimize the operating results of the MBR process through a certain transformation. The outlet is better than the Standard A of the first class in GB18918--2002. The process scheme, design feature and parameters of this project are presented in this paper.

关 键 词：污水处理厂 一体化膜生物反应器 工程设计 

分 类 号：X799.3[环境科学与工程—环境工程]