内孔加工自动进给装置的设计与试验研究  

Design and Research on Automatic Feeding Device for Inner Hole Processing

作　　者：王志强[1] 杨胜强[1] 李文辉[1] 

机构地区：[1]太原理工大学,山西太原030024

出　　处：《机械工程与自动化》2013年第2期77-78,81,共3页Mechanical Engineering & Automation

基　　金：山西省青年基金资助项目(2011021021-4);博士点新教师类专项基金(20111402120003)

摘　　要：针对深孔表面光整加工较为困难的情况,设计了一种内孔加工自动进给装置作为气粒两相流光整加工的动力装置。将气粒两相流加工头安装在自动进给装置上,再将整个加工装置放入管道内部,在气粒两相流加工头和自动进给装置协同作业下实现对管道内壁的自动连续光整加工。It is difficult to finish deep-hole surface. In this paper, a kind of automatic feeding device was designed as the power unit of inner hole surface finishing, in which a surface finishing head was installed. The whole mechanism was put into the pipeline, with collaboration of the finishing head and automatic feeding device, the deep-hole surface could be polished automatically and continuously.

关 键 词：光整加工 深孔 自动进给装置 

分 类 号：TG66[金属学及工艺—金属切削加工及机床]