HSC360型混砂车搅拌罐溅水现象分析及结构改进设计  被引量:3

Splash Phenomena Analysis and Structure Improvement Design for Agitation Tank of HSC360 Blender Truck

在线阅读下载全文

作  者:黄天成[1] 周思柱[1] 陈翔[2] 袁新梅[1] 

机构地区:[1]长江大学机械工程学院,湖北荆州434023 [2]中海油能源发展股份有限公司采油服务分公司,天津300457

出  处:《长江大学学报(自科版)(上旬)》2013年第1期60-62,1,共3页JOURNAL OF YANGTZE UNIVERSITY (NATURAL SCIENCE EDITION) SCI & ENG

基  金:国家863计划资助项目(2009AA063601);国家科技重大专项(2011ZX05048-08HZ);湖北省高等学校科技创新团队计划项目(T200906)

摘  要:针对HSC360型混砂车搅拌罐在工作过程中出现的溅水问题,在现有搅拌罐结构基础上,根据搅拌罐设计技术要求,提出了5种不同的搅拌罐结构改进方案,并利用CFD分析软件对搅拌罐现有结构及改进后的结构进行了数值模拟。数值分析结果表明,在搅拌罐进水口夹层上方添加一盖板,同时在搅拌罐中间部位添加6个进水弯头之后,进水口最大流速下降最大,达到了23.52%,且仅有极少量的水处在最大流速附近,说明该方案可以很好地解决搅拌罐溅水问题。According to the water splash problems of agitation tank of HSC360 blender truck during the work,four different structure improvement schemes are put forward based on the existing structure and the design technical requirements of agitation tank,and the numerical simulation is carried out by CFD analysis software for the existing structure and improved structure.The results show that the maximum flow rate decline reaches 23.52%,and only a minimum amount of water is near the maximum velocity,so the scheme can well solve the water splash problem of the agitation tank.

关 键 词:混砂车 搅拌罐 结构改进 数值模拟 

分 类 号:TQ051.72[化学工程]

 

参考文献:

正在载入数据...

 

二级参考文献:

正在载入数据...

 

耦合文献:

正在载入数据...

 

引证文献:

正在载入数据...

 

二级引证文献:

正在载入数据...

 

同被引文献:

正在载入数据...

 

相关期刊文献:

正在载入数据...

相关的主题
相关的作者对象
相关的机构对象