基于LabVIEW的全线控纯电动汽车测控平台开发  

Development of Measurement and Control Platform of A Full Drive-By-Wire Electric Vehicle Based on LabVIEW

作　　者：宗长富[1] 卜未琦[1] 宋攀[1] 陈国迎[1] 

机构地区：[1]吉林大学汽车仿真与控制国家重点实验室

出　　处：《汽车技术》2013年第4期42-46,共5页Automobile Technology

基　　金：国家自然科学基金资助(编号:50775096);吉林大学研究生创新基金资助项目(编号:20121088)

摘　　要：针对全线控纯电动汽车(UFEV)的特点开发了测控平台,基于LabVIEW设计了UFEV测控平台的硬件架构和和软件环境,并利用此平台进行了实车试验验证。试验结果表明,该测控平台可实现对转向系统和驱动系统信号的实时测量、显示并记录,较好地满足了实车测试与控制的需要。A measurement and control platform is developed in consideration of the characteristics of full drive-by- wire electric vehicle （UFEV）. Meanwhile, hardware architecture and software environment of UFEV measurement and control platform are designed based on LabVIEW. Then the platform is used for vehicle test verification. Results show that the platform, which is able to realize real-time measurement, display and recording of signals in steering and driving systems, can better meet the requirements of vehicle measurement and control.

关 键 词：全线控纯电动汽车 测控平台 LABVIEW 

分 类 号：U467.499[机械工程—车辆工程]