检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:付秀华[1] 黄金龙[1] 莫朝燕[1] 王煜[1]
机构地区:[1]长春理工大学光电工程学院,吉林长春130022
出 处:《中国激光》2013年第3期152-156,共5页Chinese Journal of Lasers
基 金:吉林省科技发展计划项目(20086012)资助课题
摘 要:为了提高黄光激光器的信噪比,采用Ta2O5和SiO2作为高低折射率材料,通过电子枪蒸发及离子辅助沉积技术,利用制备的589、1064、1178、1342nm波长处分别有特定透射率的干涉截止滤光片对无用光信号进行过滤。在实际镀制过程中,由于沉积工艺条件不同,导致材料折射率的不稳定。另外监控方法易引起误差.通过调整优化工艺参数并调整膜系,有效控制膜厚监控精度,提高了对应波长的光学性能。经过高温、潮湿等恶劣环境测试,该滤光片满足黄光激光器的使用要求。To improve the signal-to-noise ratio and filter the useless signal, Ta2O5 and SiO2 are chosen as the film materials. Electron gun and ion-assisted deposition system are used for film preparation. The interference cut-off filter films which have specific transmittance at 589, 1064, 1178, 1342 nm are deposited. In the actual coating process, the refractive indexes of materials are not stable in different conditions. In addition, the monitoring method lead to the errors. Optimizing the parameters and designing the film system can effectively control film thickness monitoring accuracy. Therefore, the optical properties corresponding to the wavelengths are enhanced. The experimental results show that the filter film can withstand high temperature, wet and other environments, completely meeting the demands of yellow laser.
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.192