紫外辐照-催化湿式过氧化氢氧化技术处理酸性大红GR染料废水  

Treatment of Acid Red GR Wastewater by UV Irradation-Catalytic Wet Peroxide Oxidation Process

作　　者：涂盛辉[1] 朱细平[1] 梁海营[1] 钟观华[1] 吴林华[1] 

机构地区：[1]南昌大学环境与化学工程学院,江西南昌330031

出　　处：《化工环保》2013年第2期111-114,共4页Environmental Protection of Chemical Industry

摘　　要：采用自制的负载型CuO-ZnO-CeO2/γ-Al2O3催化剂,常温常压下通过紫外辐照-催化湿式氧化技术处理酸性大红GR模拟染料废水。考察了催化剂加入量、H2O2加入量、废水pH、反应时间、初始酸性大红GR质量浓度等对废水脱色率的影响。实验得到最佳工艺条件为初始酸性大红GR质量浓度200 mg/L,催化剂加入量10.0 g/L,H2O2加入量2.0 mL/L,废水pH 4,反应时间2 h。最佳工艺条件下废水脱色率达99.33%。The simulated acid red GR wastewater was treated by UV irradation-catalytic wet peroxide oxidation process under ambient temperature and pressure using self-made supported CuO-ZnO-CeO2/γ-Al2O3 catalyst.The factors affecting the wastewater decoloration rate were studied.The optimum process conditions are as follows：initial acid red GR mass concentration 200 mg/L,catalyst dosage 10.0 g/L,H2O2 dosage 2.0 mL/L,wastewater pH 4,reaction time 2 h.Under these conditions,the wastewater decoloration rate can reach 99.33%.

关 键 词：酸性大红GR 紫外辐照 催化湿式过氧化氢氧化 催化剂 脱色 废水处理 

分 类 号：X703[环境科学与工程—环境工程]