智能型实验用红外加热反应釜温度控制系统的设计与实现  

Design and Implementation of Infrared Heating Reaction Kettle Temperature Control System of Intelligent Experiment

作　　者：高强[1] 张劲松[1] 佟璐[1] 张新宇[1] 刘浩[1] 

机构地区：[1]齐齐哈尔大学电子信息工程系,黑龙江齐齐哈尔161006

出　　处：《科技信息》2013年第5期1-2,共2页Science & Technology Information

基　　金：齐齐哈尔大学"大学生创新创业训练计划"项目研究成果;项目编号XL2012028

摘　　要：实验用化学反应釜是实验室常用的一种反应容器,使各种化工物料在较高的压力和温度下充分搅拌,从而强化传质和传热。温度是其主要被控制量,保证实验质量的重要因素之一。本系统采用节能型红外夹套式加热器加热,气体制冷以及上、下位机结合数据采集的方案。介绍了基于VB6.0的上位机监控界面开发和基于STC-89C52单片机的下位机控制器的设计,包括控制器软硬件设计、上下位机串口通讯、数据存取与实时数据显示等。同时应用到实验室反应釜进行温度控制,验证了设计可行性和有效性。Chemical reactor experiment is a reaction vessel used in laboratory, makes the various chemical material stir in high pressure and temperature, thus, strengthen the mass and heat transfer. While the temperature is the main controlled variable, which is one of the important factors of the experimental quality. The design uses energy-saving infrared jacket heater for heating, gas cooling, stratification structure the master and slave computer with the data acquisition scheme. The system based on the development of PC monitor interface that based on VB6.0. And based on STC-89C52 microcontroller controller, which include the hardware design, stratification structure the master and slave computer serial communication, data access and real-time data display. At the same time, test laboratory reactor temperature control experimentally, to verifying the feasibility and effectiveness.

关 键 词：反应釜 红外夹套式加热器 温控 

分 类 号：TP273[自动化与计算机技术—检测技术与自动化装置]