温度及功率密度对镍基合金Inconel 718激光温喷丸影响的数值模拟与实验研究  

Finite Element and Experiment Study on the Effect of Temperature and Laser Intensity on Warm Laser Shock Peening Ni-Based Superalloy Inconel 718

作　　者：季杏露[1] 周建忠[1] 黄舒[1] 陈寒松[1] 谢小江[1] 安中伟[1] 杨晶[1] 左立党[1] 孟宪凯[1] 

机构地区：[1]江苏大学机械工程学院,江苏镇江212013

出　　处：《应用激光》2013年第2期139-143,共5页Applied Laser

基　　金：国家自然基金资助项目(项目编号:51175236);江苏省2012年度普通高校研究生科研创新项目(项目编号:CXZZ120659);大学生科研立项资助项目(项目编号:11A378);江苏省光子制造科学与技术重点实验室开放基金资助项目(项目编号:GZ201107)

摘　　要：激光温喷丸是一种新型的激光表面强化工艺,即先将材料预热到一定的温度,再对材料进行激光喷丸处理。相比于常温激光喷丸,激光温喷丸产生的热-力效应更有利于提高循环载荷和高温下的残余应力和微观组织性能稳定性。温度和激光功率密度是影响激光温喷丸效果的两个重要因素,本文以Johnson-Cook模型为本构模型,用Abaqus有限元分析软件模拟分析了不同温度(250、260、270、290、310℃)和激光功率密度I(07、8、9、10 GW/cm2)下激光喷丸Inconel 718镍基合金后的残余应力分布,从而确定了激光温喷丸镍基合金的较优工艺参数组合I0=9 GW/cm2,T=260℃,此时残余应力存在一极大值-489.06 MPa。在此基础上,选取I0=9 GW/cm2进行激光温喷丸(260℃)和激光喷丸实验,用X射线应力测定仪和显微硬度计分别对试样的表面残余应力和显微硬度进行测试,发现表面残余应力和模拟结果一致性较好,激光温喷丸后的显微硬度相对于基体提高了60%,比常温激光喷丸后的显微硬度更有所增大。Warm laser shock peening is an innovative surface treatment by heating up the workpiece before laser peened. The thermomechanical effect of WISP increase the stability of residual stress and microstructure under high temperature and cyclic loading. Temperature and laser intensity are two important factors of WISP. This paper analyzed the residual stress contribution of WISP Ni-based superalloy Inconel 718 under different temperatures （250,260,270,290,310℃） and laser intensities （7,8,9,10 GW/cm2）,and found that the residual stress is highest when 10=9 GW/cm2, T=260℃.X-ray stress analyzer and microhardness meter was used to test the residual stress and microhardness of WISP （260℃）and ISP, the results indicated that the experimental residual stress and the simulated results were in good agreement, and the microhardness after WISP had a 60% increment which is higher than the ISP condition.

关 键 词：温度 激光温喷丸 镍基合金 数值模拟 

分 类 号：TG178[金属学及工艺—金属表面处理]