HPPO工艺催化剂活性组分研究  

Study on Catalytic Material Used in HPPO Process

作　　者：朱斌[1] 

机构地区：[1]中国石化石油化工科学研究院,石油化工催化材料与反应工程国家重点实验室,北京100083

出　　处：《石油学报（石油加工）》2013年第2期223-227,共5页Acta Petrolei Sinica(Petroleum Processing Section)

基　　金：国家基础研究"973"项目(2006CB202508);中国石化项目(S411032)联合资助

摘　　要：针对丙烯与过氧化氢制备环氧丙烷反应(HPPO工艺)的特点,对专用催化活性组分钛硅分子筛HTS进行了研究。该研究包括对HPPO工艺所需活性组分钛硅分子筛制备条件的考察和优化,将钛硅分子筛HTS改性制备为合适的丙烯环氧化催化活性组分,然后制备成催化剂,用于HPPO中试实验。结果表明,丙烯与过氧化氢制备环氧丙烷反应的过氧化氢转化率大于95%,环氧丙烷选择性大于95%,催化剂活性稳定性良好。Based on the characteristic of propylene oxide preparation reaction from propylene with hydrogen peroxide as oxidant, catalytic material HTS was investigated thoroughly, including the optimization of preparation conditions for titanium silicalites used in hydrogen peroxide-propylene oxide （HPPO） process, the modification of HTS, the preparation of the catalyst with modified HTS as active component, and the evaluation of HPPO pilot with the prepared catalyst. The results showed that with the suitably modified HTS as the active component of catalyst for HPPO the conversion of hydrogen peroxide and the selectivity to propylene oxide both above 95% could be obtained, and active stability of the catalyst was good enough for propylene epoxidation.

关 键 词：钛硅分子筛 活性组分 改性 丙烯环氧化 环氧丙烷 

分 类 号：TQ426[化学工程]