利用给水厂污泥制备透水砖的实验研究  

Experimental study on production of water permeable brick using waterworks sludge

作　　者：谢敏[1] 高丹[1] 刘小波[1] 李芳[1] 黄聪[1] 

机构地区：[1]长沙理工大学水利工程学院,长沙410014

出　　处：《环境工程学报》2013年第5期1925-1928,共4页Chinese Journal of Environmental Engineering

基　　金：国家自然科学基金资助项目(51108043);湖南省科技计划项目(2010GK3207);国家级大学生创新实验项目

摘　　要：以给水厂污泥、粉煤灰和普通砂为主要原料,添加一定量的粘结剂制备透水砖。探讨了污泥掺加量、烧结温度和成型压力对透水砖基本性能的影响,结果表明,当污泥掺量为30%～40%,添加30%～35%,粒径为1.0～1.4 mm普通砂颗粒时,在30 MP压力下成型、1 150℃下烧结制备出的成品抗压强度达36.53 MP,透水系数为1.08×10-2cm/s,满足JC/T945-2005《透水砖》相关要求。In the present study, combination of waterworks sludge, fly ash and common sand was prior used to generate water permeable bricks with adding a certain amount of binder. Subsequently, how the following parameters i.e. sludge adding rate, sintering and molding temperature affected the key characteristics of the pro-posed bricks were investigated in-depth. Finally, it can be obtained from the study that the generated bricks （compressive strength： 36.53 MP; permeability coefficient： 1.08 × 10^-2 era/s） could satisfy the product re-quirements （water permeable brick, JC/T945-2005 ） under the following production conditions： introducing 30%-40% of sludge, and 30% - 35% of common sand with particle size ranging from 1.0 to 1.4 ram; con-structing at 30 MP and sintering at 1 150%] for 1 h.

关 键 词：给水厂污泥 透水砖 抗压强度 透水系数 

分 类 号：X705[环境科学与工程—环境工程]