检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:廖志超[1] 贺恒鑫[2] 韩云[1] 张佳鑫[2]
机构地区:[1]西安高压电器研究院有限责任公司,西安710077 [2]华中科技大学,武汉430074
出 处:《高压电器》2013年第5期60-68,73,共10页High Voltage Apparatus
摘 要:对于同塔双回直流输电系统,考虑到其线路之间的电磁耦合,一极发生故障将同时在健全极线感应出过电压,对正常运行极的换流站设备和线路造成影响,因此笔者认为对同塔双回直流输电系统换流站的过电压特性的研究是同塔双回直流输电工程设计的核心技术环节。为了进行具体的研究分析,笔者以溪洛渡±500 kV同塔双回直流输电工程为例,结合此工程主回路设计方案,利用PSCAD/EMTDC电磁暂态仿真软件,对±500 kV同塔双回直流输电工程的各种过电压特性进行系统研究。通过系统模拟仿真,综合分析避雷器限压作用的影响,这些研究对于防范类似故障的发生以及处理等具有一定的借鉴意义。For the double-circuit transmission line,there exist electrostatic coupling and electromagnetic coupling between the two lines. Once one-circuit fault, it will affects the other single-circuit normal operation. Therefore, the authors think that the studies on the over-voltage characteristics of double-circuit transmission line are the core technology of the double-circuit DC transmission engineering design. In this paper,to conduct specific research and analysis,take Xiluodu-Guangdong double-circuit transmission line as an example,binging the main circuit system design scheme, all kinds of over-voltage characteristics for ±500 kV double-circuit HVDC transmission system are studied by using PSCAD/EMTDC. Through the system simulation and comprehensive analysis of the surge arresters used, it is of a certain significance for preventing and dealing with similar faults.
分 类 号:TM721.1[电气工程—电力系统及自动化]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.28