SA335P91钢焊接工艺研究  

Welding Process Research on SA335P91 Steel

作　　者：张红玉 原庆芳 刘守君[3] 齐明贞[4] 

机构地区：[1]山东华臻重工有限公司,山东烟台265500 [2]山西新华化工有限责任公司设计研究所,山西太原030051 [3]中北大学机械工程与自动化学院,山西太原030051 [4]太康县职业中等专业学校,河南周口461400

出　　处：《机械管理开发》2013年第3期3-5,共3页Mechanical Management and Development

基　　金：仪器科学与动态测试教育部重点实验室青年基金资助项目(20100205)

摘　　要：SA335P91钢是一种改进型的9Cr-1Mo钢,它是由美国橡树岭国家实验室和美国燃烧公司研究开发的新钢种。SA335P91钢属马氏体钢,具有一定冷裂倾向和接头脆化倾向,因而对焊接工艺和热处理工艺有严格的要求。提出了可以采用氩弧焊封底、焊条电弧焊填充及盖面工艺的焊接工艺,严格选用合适的预热温度、层间温度和焊接材料。焊后无损检测结果为I级,力学性能试验结果良好,满足使用要求。SA335P91 steel is a kind of improved 9Cr-lMo steel. It is a new steel grade, which is researched and developed by the United States of America and Oak Ridge National Laboratory USA combustion company. SA335P91 steel is a martensitie steel, with a certain cold craek tendency and joint embrittlement tendency, so it has strict requirements on the welding process and heat treatment process. This paper presents the argon arc welding rod arc welding sealing, filling and cover technology of welding process, strict selection of appropriate preheating temperature, interpass temperature and welding matorials. Welding NDT results for I. Mechanical performance test result is good. It meets the use requirements.

关 键 词：SA335P91钢 焊接工艺 热处理 无损检测 力学性能 

分 类 号：TG44[金属学及工艺—焊接]