制浆过程有机固体废弃物压制木塑复合板初探  

Study of Making Wood/Plastic Composite Board from Pulp Mill Organic Solid Waste

作　　者：苏振华[1] 冯文英[1] 徐明[1] 张升友[1] 张羽[1] 王承亮[1] 曹灜戈 

机构地区：[1]中国制浆造纸研究院,北京100061

出　　处：《造纸科学与技术》2013年第2期93-96,共4页Paper Science & Technology

基　　金："十二五"国家科技支撑计划课题(项目编号:2011BAC11B02)

摘　　要：研究了以造纸工业有机固体废弃物压制木塑复合板的可行性,对成品板的厚度、密度、静曲强度、弹性模量、内结合强度、吸水厚度膨胀率等指标进行了测定,发现含纤维固废和含塑料固废经粉碎后,按一定比例混合热压后,可以压制成各项指标均合格的木塑复合板材。实现有机固体废弃物的高值化利用。Feasibility of making wood/plastic composite board from pulp mill organic solid waste was studied, thickness, density, bending strength, elastic modulus, internal bond strength, swelling thickness were measured. The results show that pulp mill organic solid waste, with the process of smashing, mixing, heat pressing and cold pressing, can be used to produce wood/plastic composite board. Its quality can meet the requirement of the quality standards of the general board.

关 键 词：制浆造纸 有机固废 木塑复合板 

分 类 号：TS793[轻工技术与工程—制浆造纸工程]