正负压转换手术室工艺平面探讨——《医院洁净手术部建筑技术规范》修订组研讨系列课题之三  

Discussion on layout design of positive and negative pressure conversion operating rooms:Part3 of the series of research practice of the revision task group of the Architectural technical code for hospital clean operating department

作　　者：曹国庆[1] 张益昭[1] 党宇[1] 牛维乐[1] 

机构地区：[1]中国建筑科学研究院

出　　处：《暖通空调》2013年第5期73-76,共4页Heating Ventilating & Air Conditioning

基　　金：建研院青年科研基金项目"正负压转换手术室净化空调系统研究"(编号:20110109331030001);"十二五"国家科技支撑计划课题"医院建筑绿色化改造技术研究与工程示范"(编号:2012BAJ06B06)

摘　　要：将正压手术室、负压手术室融为一体的正负压转换手术室,可根据实际工作需求进行室内压力状态的切换,将手术室变换为正压状态或负压状态。结合有关标准规范的要求,分析了我国正负压转换手术室的工程建设现状,探讨了正负压转换手术室的工艺平面布局、病患流动路线和压力梯度。The positive and negative pressure conversion operating room is a combination of a positive pressure operating room and a negative pressure operating room, which can change the indoor pressure into positive or negative condition based on actual medical demands. Combined with the requirements of relevant standards and codes, analyses the current construction situation of the positive and negative pressure conversion operating room in China, and discusses the process layout, patients flow path and pressure gradient.

关 键 词：手术室 正负压转换手术室 平面设计 静压差 压力梯度 

分 类 号：TU834[建筑科学—供热、供燃气、通风及空调工程]