开放耗材输液泵的流速测试和讨论  

Testing and Discussion of Infusion Pump Based on Open Consumables

作　　者：张飚瑞[1] 

机构地区：[1]太原理工大学应用力学与生物医学工程研究所,山西太原030024

出　　处：《中国医疗设备》2013年第5期49-50,83,共3页China Medical Devices

摘　　要：输液泵在临床领域普遍使用,目前临床上使用的多是开放耗材输液泵,其耗材使用的都是重力输液器,而输液泵应该有专用的输液器,这样才能保证流速的精度。本文选取了3种不同的输液管路在2台输液泵上做测试,就测试结果和输液泵流速的相关问题进行讨论。Infusion pumps are commonly used in clinical, especially the open consumable infusion pumps, the consumable part of which adopting the gravity sets. However, dedicated infusing outfit is necessary for infusion pumps, so as to ensure the acctaacy of the flow rate. Three kinds of infusion pipe were tested in 2 sets of infusion pump, and the results and relevant problems about flow rate of infusion pump are discussed in this paper.

关 键 词：输液泵 注射泵 医用耗材 质量控制 

分 类 号：TH789[机械工程—仪器科学与技术]