光纤Bragg光栅在绕组温度测量中的应用研究  

The research of fiber Bragg grating in the application of the winding temperature measurement

作　　者：闫思安[1] 刘江[1] 庄君刚[1] 薛俊华[1] 赵振刚[1] 谢涛[1] 李川[1] 

机构地区：[1]昆明理工大学信息工程与自动化学院,昆明650500

出　　处：《光学技术》2013年第3期200-203,共4页Optical Technique

基　　金：云南省自然科学基金(2007F181M);云南电网科技项目变电站电气设备非电量在线监测研究(云电技术[2009]18号;云电技术[2010]1号;云电技术[2010]16号)

摘　　要：实时监测变压器绕组温度,可解决变压器在运行过程中因绕组温度过高而造成的寿命减少、设备损坏等问题。使用绝缘纸做成的层压板对光纤测温触头进行封装,将测温触头安装在变压器绕组上。当绕组温度发生改变时,测温触头中的光纤Bragg光栅中心波长将产生移位。温度响应实验表明,光纤Bragg光栅温度传感器的线性度为0.79%FS;温度灵敏度为8.91pm/℃,重复性误差1.76%FS。绕组测温实验结果表明,环境温度为15℃时,在75V电压下,90min后,绕组温度稳定在24℃～25℃之间在;100V电压下,105min后,绕组温度稳定在32℃～33℃之间。The real-time temperature monitoring can solve the problems such as the reduction of the equipment life expectancy and damage of the equipment. The optical fiber temperature measurement contact is encapsulated by the lami- nates which are made of insulating papers, and it is installed on the transformer winding. When the transformer winding temperature is changed, the optical fiber Bragg grating center wavelength of the temperature measurement is shifted. The temperature response experiment shows that the linearity of fiber Bragg grating temperature sensor is 0. 79% FS, the sensitivity is 8. 91pm/℃, and the repeatability error is 1.76% FS. The winding temperature experiments show that when the environment temperature is 15 ℃, the winding temperature can stabilize between Z4℃ and 25℃ after 90 minutes un- der 75V, and stabilize between 32℃ and 33℃ after 105 minutes under 100V.

关 键 词：光纤BRAGG光栅 变压器 绕组 温度 绝缘纸 波长移位 

分 类 号：TN253[电子电信—物理电子学]