云南某细粒钛铁矿的选矿工艺试验研究  被引量:8

Experimental Research on Processing of Fine Fraction Ilmenite Ore of Yunnan

在线阅读下载全文

作  者:严鹏[1] 张桂芳[1] 肖军辉[1] 张昱 

机构地区:[1]昆明理工大学国土资源工程学院,昆明650093 [2]昆明晶石矿冶有限公司,昆明650093

出  处:《有色金属(选矿部分)》2013年第3期38-41,共4页Nonferrous Metals(Mineral Processing Section)

基  金:云南省学科带头人后备人才基金(2006PY01-05)

摘  要:云南某细粒级钛铁矿含TiO24.16%、TFe 18.15%,主要含钛铁矿,还有少量的金红石和钙钛矿。针对矿物嵌布粒度细、品位低、工艺矿物学性质复杂等特点,为了确定选矿工艺条件,本研究进行了磨矿细度试验、强磁选钛的磁场强度试验,摇床重选试验等选矿工艺探索试验,根据试验结果,选出最佳试验工艺条件,采用弱磁—强磁—分粒级摇床重选的联合流程,得到TiO2品位41.26%、回收率45.82%的钛粗精矿,为后续的进一步处理创造了条件。A fine fraction ilmenite ore contains 4.16% TiO2 and 18.15% TFe, and ilmenite is the main valuable mineal, as well as with a small quantity of futile and perovskite. Based on the characteristics of finely disseminated size, low grade and complex properties of process mineralogy, a sequence of tests were carried out, such as grinding fineness test, magnetic intensity test and shaking table test. The optimal experimental conditions were confirmed. By the combination flowsheet of low-intensity magnetic separation- high-intensity magnetic separation-shaking table gravity based on size distribution, ilmenite rough concentrate grading 41.26% TiO2 was obtained with recovery of 45.82%, and it could provide the service for further treatment.

关 键 词:细粒钛铁矿 选矿工艺 磁选 重选 

分 类 号:TD922.2[矿业工程—选矿] TD924

 

参考文献:

正在载入数据...

 

二级参考文献:

正在载入数据...

 

耦合文献:

正在载入数据...

 

引证文献:

正在载入数据...

 

二级引证文献:

正在载入数据...

 

同被引文献:

正在载入数据...

 

相关期刊文献:

正在载入数据...

相关的主题
相关的作者对象
相关的机构对象