检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:詹扬春[1] 张毅[1] 赵佳飞[1] 宋永臣[1] 杨明军[1] 建伟伟[1] 沈勇[1] 常飞[1]
机构地区:[1]大连理工大学海洋能源利用与节能教育部重点实验室,辽宁大连116024
出 处:《大连理工大学学报》2013年第3期354-358,共5页Journal of Dalian University of Technology
基 金:国家自然科学基金资助项目(重点项目50736001);国家自然科学基金青年基金资助项目(51006016);“九七三”国家重点基础研究发展计划资助项目(2011CB707304)
摘 要:超临界CO2溶解原油的能力主要取决于超临界流体的密度.基于高精度磁悬浮天平实验系统,利用癸烷模拟原油,系统测量了不同温度(313~353K)和压力(12~18MPa)下,不同CO2质量分数(0、8%、20%、43%、67%)CO2-癸烷溶液的密度,并分析了各参数对CO2-癸烷溶液密度的影响.研究发现在CO2质量分数一定的情况下,CO2-癸烷溶液密度随着压力的增加而增加,随温度的升高而降低.CO2溶解质量分数对溶液的性质有显著影响,CO2的注入量对驱油存在一个有效的区间,可以根据井下温度、压力来决定注入量,从而达到最佳的驱油效果.The capacity of supercritical carbon dioxide (sc-CO2) to dissolve crude-oil is mainly determined by the density of supercritical fluid. Using decane instead of crude-oil, magnetic suspension balance (MSB) is applied to the measurement of CO2-decane solution density of different CO2 mass fractions (0, 8%, 20%, 43%, 67%) at different temperatures (313-353 K) and pressures (12-18 MPa). And the effects of the three parameters on CO2-decane solution density are analyzed. The experimental results show that the CO2-decane solution density increases with the pressure increasing and decreases with the temperature increasing at the certain CO2 mass fraction. The CO2 mass fraction plays a decisive role in CO2-decane solution properties. During CO2 flooding processes, CO2 injection rate has a relative effective region. In addition,the optimal region of CO2 injection rate is determined by the reservoir temperature and pressure.
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.28