免烧锰渣砖的配合比设计、制备与性能研究  

Mixture Ratio Design、Preparation and Performance of Non-burnt Manganese Slag Brick

作　　者：郭盼盼[1] 张云升[1] 范建平[1] 李司晨[1] 

机构地区：[1]东南大学材料科学与工程学院,南京211189

出　　处：《硅酸盐通报》2013年第5期786-793,共8页Bulletin of the Chinese Ceramic Society

基　　金：十二五科技支撑项目(20128BAK14B05);国家自然科学基金重点项目(51138002)

摘　　要：本文基于石灰激发锰渣及粉煤灰类火山灰材料的机理,在蒸养条件下制备免烧锰渣砖,系统研究了不同掺量的粉煤灰(10%～40%)和水泥(5%～20%)对石灰-锰渣胶凝体系力学性能的影响规律;并在此基础上对胶砂比、成型压力及养护条件进行了系统研究,得出最佳配合比为:锰渣60%、石灰10%、粉煤灰20%、水泥10%,胶凝材料∶砂=1∶0.5,水胶比:0.18,成型压力:10 MPa,养护温度:90℃;另外通过SEM和XRD对免烧锰渣砖的微观形貌和水化产物进行了分析,发现胶凝材料水化产生的胶凝物质使电解锰渣免烧砖的强度增强。Based on lime simulating manganese slag and fly ash volcanic ash materials mechanism,Non-burnt manganese slag brick was prepared in the saturated steam environment.The mechanical properties of lime-manganese slag system with incorporation of fly ash（10%-40%） and cement（5%-20%）were systematically investigated.On this basis,mortar ratio,forming pressure and curing conditions were systematically studied.Obtained the optimum mixture ratio： manganese slag 60%,lime 10%,fly ash 20%,cement 10%,cementitious materials∶sand=1∶0.5,water-cement ratio： 0.18,molding pressure： 10 MPa,the curing temperature： 90 ℃;Addition,the morphology and hydration products of non-burnt manganese slag brick were analyzed by XRD and SEM,found that the hydration of cementitious materials increased the strength of non-burnt manganese slag brick.

关 键 词：电解锰渣 免烧砖 成型压力 养护条件 微观结构 

分 类 号：TU522[建筑科学—建筑技术科学]