单自由度体系地震残余变形分析及计算  

Post-earthquake Residual Deformation Prediction of SDOF System

作　　者：张勤[1] 朱绩超[2] 贡金鑫[1] 

机构地区：[1]大连理工大学建设工程学部,辽宁大连116024 [2]大连交通大学土木与安全工程学院,辽宁大连116028

出　　处：《土木建筑与环境工程》2013年第3期32-41,共10页Journal of Civil,Architectural & Environment Engineering

基　　金：国家自然科学基金重点资助项目(90815027);国家自然科学基金项目(51278081)

摘　　要：地震残余变形是结构可修复能力的重要指标,准确分析结构的残余变形对于震后结构性能的评估与控制具有重要意义。基于对不同单自由度(SDOF)体系的弹塑性地震响应的统计分析,研究了不同参数对地震残余变形的影响,其中滞回特性、屈服后刚度、地面峰值加速度(PGA)以及最大弹塑性变形对残余变形的影响较大;同时结合理论分析提出了分别适用于弹塑性Kinematic滞回模型和Takeda滞回模型的残余变形简化计算方法。该方法是以先获得结构的最大弹塑性变形为基础的,能与传统的确定结构最大变形性能的抗震分析方法(Pushover方法)较好地结合。最后,以一钢筋混凝土单柱桥墩为例,详细阐述了所提出的方法进行单自由度体系结构的地震残余变形计算及震后结构性能评估的过程,分析表明基于Takeda模型的结构残余变形的计算结果偏于安全。Accurately predicting the residual displacement of reinforced concrete （RC）structures after an earthquake is of great significance in post-earthquake structural performance evaluation and control. To study the residual deformation of the structure, seismic time-history responses of single degree-of-freedom （SDOF） systems with different parameters were analyzed. Based on the analytical results, simplified models for estimating the likely residual deformations of structures characterized by Takeda and Kinematic hysteretic models were proposed respectively, and the residual deformation was found to be sensitive to hysteretic characteristics, stiffness ratio of structures, peak ground acceleration （PGA）, as well as maximum elasto-plastic deformation. A case study for RC single-column bridge pier was provided to illustrate the process of residual deformation calculation and post-earthquake performance evaluation by using the proposed methods. Calculation results indicate that the residual deformation of the single-column pier characterized by the Takeda model often is much larger than that of columns characterized by the Kinematic model.

关 键 词：残余变形 最大弹塑性变形 滞回特性 屈服后刚度 地面峰值加速度 

分 类 号：TU375.3[建筑科学—结构工程]