高强度铝蜂窝组装设备  

Research on Assembly Equipment of High Strength Aluminium Honeycomb

作　　者：刘天宝[1] 陶红艳[1] 于文泽[2] 王书付[2] 王晟[1] 

机构地区：[1]重庆理工大学机械工程学院,重庆400050 [2]中国科学院深圳先进技术研究院,广东深圳518055

出　　处：《四川兵工学报》2013年第5期83-86,共4页Journal of Sichuan Ordnance

基　　金：广东省中国科学院全面战略合作项目"高速列车铝蜂窝吸能器的关键技术研究及产业化"(2011A09010019)

摘　　要：从现行铝蜂窝制造工艺入手,分析了传统铝蜂窝制造工艺的优缺点,在此基础上,提出了高强度铝蜂窝的制造工艺过程。采用现代机械设计方法学对组装设备方案进行评价和决策,基于此,选择了设备的最佳原理方案。以工艺为导向,对组装设备的机械结构进行模块化的设计,并阐述了设备组装工艺过程。最后分析了设备控制系统的硬件组成以及软件控制流程。Based on current aluminum honeycomb manufacture process,the paper analyzed the advantages and disadvantages of traditional aluminum honeycomb manufacture process,and put forward a technology of manufacturing high strength aluminum honeycomb.The study evaluated and selected the best solution from the preliminary selection of assembly equipment using the theory of modern design methods.The mechanical structure of each module was designed and the process of assembly technology was analyzed.Finally the composition of hardware and the software control process of the equipment were analyzed.

关 键 词：组装工艺 评价决策 结构 控制 

分 类 号：TH6[机械工程—机械制造及自动化]