检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:刘尧文[1] 张茂林[2] 刘常旭 张晓辉[2] 张娟[2]
机构地区:[1]中国石化江汉油田分公司 [2]西南石油大学 [3]中国石油集团川庆钻探公司国际工程公司
出 处:《天然气勘探与开发》2013年第2期41-43,86,共3页Natural Gas Exploration and Development
摘 要:物质平衡方程计算动态储量已被广泛地应用于气藏开发研究中,但该方法对地层压力精度要求较高,地层压力准确与否直接影响储量计算结果的准确度。在低能量储层及致密气层中,常规的试井测压要测得准确的地层压力需要较长的关井时间,会影响到气藏的正常生产。当气井进入拟稳定流状态后可以利用流动物质平衡对气井单井动态控制储量进行计算,该方法主要依据容易获得的井口压力,较好的解决了地层压力资料较少情况下动态储量的计算问题。在应用物质平衡法计算低渗透气藏动态控制储量时,为避免认识上的偏差和计算结果的失真。应该首先判断流动是否达到拟稳定流,并应用拟稳定以后的数据进行分析,不能笼统地将所有数据点回归为一条直线。Material-balance method to calculate dynamic reserves has been widely applied to reservoir development.However,it requires highly accurate formation pressure,which can affect directly calculated reserves.In low-energy and tight gas reservoirs,a longer shut-in time is needed to obtain an accurate formation pressure even though this time may affect a normal production.Under the state of pseduosteady flow,the dynamic controlled reserves of single well can be calculated by flowing material-balance method.In spite of few formation-pressure data,this method can calculate dynamic reserves based on easily obtained wellbore pressure.To avoid some errors during this calculation,we should estimate whether the flow is under the pseduosteady state,and use some data after pseduosteady flow to carry out an analysis.
分 类 号:TE348[石油与天然气工程—油气田开发工程]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.64