空间飞行器用金属橡胶减振器  

Metal-rubber vibration absorber for aerocraft

作　　者：付密果 刘源[2] 崔敏亮 曹鸣 

机构地区：[1]湖北航天技术研究院总体设计所,湖北武汉430048 [2]哈尔滨工业大学航天学院,黑龙江哈尔滨150001 [3]三江集团重型工程装备设计所,湖北武汉430040

出　　处：《光学精密工程》2013年第5期1174-1182,共9页Optics and Precision Engineering

基　　金：国家自然科学基金资助项目(No.60704020);中国博士后科学基金资助项目(No.2012M510971);黑龙江省博士后基金资助项目(No.LBH-Z11185);中央高校基本科研业务费专项资金资助项目(No.HIT.NSRIF.2014027)

摘　　要：考虑金属橡胶减振材料的优越性,设计了采用金属橡胶作减震器的减振方案用于空间飞行器仪器安装板的整体减振。建立了金属橡胶减振器的力学模型,确定了金属橡胶减振垫的结构设计参数及性能参数,并对采用整体减振设计的仪器安装板进行了数学仿真分析。最后,设计了仪器安装板的地面振动实验并进行了振动实验考核。实验结果表明,仿真分析结果与地面实验验证结果基本一致,刚度满足设计要求。相比于刚性连接形式,采用金属橡胶减振器进行整体减振后,在300Hz以上测量点的振动响应幅值大大衰减;在300 Hz以下测量点的随机响应均方根值衰减量不低于56.5%,达到了减振设计效果。With the advantages of metal rubber materials in vibration damping,a vibration damping plan based on a metal-rubber vibration absorber was proposed to damp the vibration for the integrated instrument installation plate of a aerocraft.A mechanical model of the metal-rubber vibration absorber was established and the design and performance parameters of the metal damping pad structure were designed.Then the instrument installation plate designed with integrated vibration damping method was simulated.At last,a ground vibration experiment was designed to test the vibration of the instrument installation plate.The results show that the analysis results are in agreement with ground experiment ones basically,and the stiffness meets the design requirements.Furthermore,with the integrated vibration damping by the metal-rubber vibration absorber,the random vibration amplitudes of the measuring points on the plate has a remarkable energy attenuation above 300 Hz and the random response mean square root attenuation is no less than 56.5% below 300 Hz as comparing to the instrument installation plate with a rigid connection.

关 键 词：飞行器设计 金属橡胶减振器 仪器安装板 整体减振 

分 类 号：V416.2[航空宇航科学与技术—航空宇航推进理论与工程]