基于PCL的一维形状记忆合金系统的开发与应用  

Development and application of 1D shape memory alloy system based on PCL

作　　者：王明义[1] 裘进浩[1] 季宏丽[1] 

机构地区：[1]南京航空航天大学机械结构及控制国家重点实验室,南京210016

出　　处：《计算机辅助工程》2013年第A01期456-462,共7页Computer Aided Engineering

基　　金：长江学者和创新团队发展计划资助项目(IRT0968);江苏高校优势学科建设工程资助项目;南京航空航天大学基本科研业务费资助项目(NS2013008)

摘　　要：智能材料的发展给结构设计带来新的方向,同时也给商用有限元软件的应用迎来新的挑战.由于MSC Nastran的局限性,尚不能很好地模拟一些智能材料.结合实际工程需要,利用Patran完善的前、后处理功能及二次开发语言,将一维形状记忆合金(Shape Memory Alloys,SMA)材料系统集成到Patran中,能方便地实现在Patran中定义其材料属性和对布置有SMA的驱动结构以及复合材料结构的快速建模分析,最后利用本文系统建立SMA复合梁以及SMA丝驱动的机翼后缘模型,并进行验证,证明此模块功能的正确性和有效性.The development of smart materials brings a new way for structural design as well as a new challenge to commercial finite element software. Due to the limitation of MSC Nastran, it is impossible to simulate smart materials. Combining with practical engineering, the 1D shape memory alloy system is created and integrated in Patran based on its perfect function of pre-processing, post-processing and its secondary development. It is easy to define the properties of shape memory alloys. The direct modeling and analysis on the composite materials and the shape memory alloys system are done. The composite beam and wing rear actuator embedded with SMA wires are built to verify its functional correctness and validity.

关 键 词：形状记忆合金 驱动器 复合材料 PCL 二次开发 

分 类 号：TG139.6[一般工业技术—材料科学与工程]