检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
机构地区:[1]北京科技大学材料科学与工程学院,北京100083 [2]北京航空材料研究院先进高温结构材料重点实验室,北京100095
出 处:《粉末冶金技术》2013年第2期89-95,共7页Powder Metallurgy Technology
摘 要:采用相图、差热分析、热处理3种不同的方法综合研究FGH96粉末高温合金中强化相γ'的完全溶解温度。从Thermo-calc软件模拟相图可知,γ'相在950~1115℃时大量溶解,完全溶解的温度为1115℃;采用差热分析法确定强化相的完全溶解温度在1120~1137℃;采用不同温度热处理后金相组织的变化来确定γ'相的完全溶解温度,发现γ'相在1100℃以下大量存在,在1100~1110℃迅速减少,在1120℃完全消失。综合3种方法,可确定平衡状态下γ'相的完全溶解温度在1110~1120℃。The complete solution temperature of γ′ in the P/M superalloy FGH96 was studied with three methods: the phase diagram of FGH96, differential thermal analysis (DTA) and heat treatment. It is shown from Thermo-calc software that complete solution temperature of y' is 1 115℃ , and a lot of γ′phase disappears at 950 - 1 115℃ ; from the result of the differential thermal analysis that the complete solution temperature of γ′ is 1 120 - 1 137℃ ; from the result of heat treatment that below 1 100℃ there are a lot of γ′, γ′ disappears quickly at 1 100 - 1 110℃ and there will be no γ′ at 1 120℃. So it is concluded that the complete solution temperature of γ′ in the P/M superalloy FGH96 is 1 110 - 1120℃.
关 键 词:FGH96粉末高温合金 γ′ 完全溶解温度
分 类 号:TG146.21[一般工业技术—材料科学与工程]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.15