检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:尹艳树[1] 王进[2] 文志刚[3] 潘静文[3]
机构地区:[1]长江大学地球科学学院,湖北荆州434023 [2]中国石油长庆油田分公司勘探开发研究院,陕西西安710018 [3]长江大学地球化学系,湖北荆州434023
出 处:《西南石油大学学报(自然科学版)》2013年第3期47-51,共5页Journal of Southwest Petroleum University(Science & Technology Edition)
基 金:国家科技重大项目(2011ZX05011-3);国家自然科学基金(40902043)
摘 要:以中国西部某油田长8油组浅水三角洲分流河道为例,分别采用序贯指示建模和多点地质统计学方法对分流河道进行表征。从模拟结果看,多点地质统计学方法较好地再现了河道形态特征,建立的河道连续性好,与实际河道具有可比性;而序贯指示建模方法建立的河道较为零散,河道三维形态相对较差。从11个模拟实现计算的储量看,两种方法的储量均值较为接近,但多点地质统计模拟的储量变动范围小,方差也小,反映了多点统计模拟方法整体差异性小于序贯指示建模。方法比较结果表明,多点地质统计学模拟实现的不确定性小,更适合油田开发与决策。The underwater distributary channels in shallow water delta are simulated by using the sequential indicator simulation method and multiple-point geostatistics simulation method in Chang 8 Formation of an oilfield in West China, respectively. The simulation results show that the multiple-point geostatistics simulation method reproduces the channel geometries and continuities, but the sequential indicator simulation method realization is of much more "noise" and discontinuities. Eleven realizations are constructed and the reservoir volumes are calculated using both methods with the average volumes close to each other, but the delta and deviation of the volumes of single normal equation simulation method is much smaller, which reveals that the uncertainty of multiple-point geostatistics simulation method is less than sequential indicator simulation method. So the multiple-point geostatistics simulation method contributes better to oilfield development.
关 键 词:多点地质统计学 序贯指示建模 比较研究 分流河道 储层地质模型
分 类 号:TE132[石油与天然气工程—油气勘探]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.38