检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:刘平[1] 李艳艳[2] 陈艳风[2] 徐丽英[3]
机构地区:[1]河北工业大学校园规划处,天津300130 [2]河北工业大学土木工程学院,天津300401 [3]北方工程设计研究院有限公司,石家庄050000
出 处:《工业建筑》2013年第6期52-55,共4页Industrial Construction
基 金:河北省自然科学基金项目(E2011202013);河北省建设科技研究计划项目(20122027);河北省高等学校科学技术研究青年基金项目(Q2012083)
摘 要:为了研究配箍率对T形柱和L形柱的破坏特征、滞回特性、刚度退化、延性性能、耗能能力的影响规律,采用拟静力试验方法,对4个高强钢筋的混凝土T形柱和L形柱进行低周往复荷载作用下的试验,分析构件的破坏特征、延性性能,绘制滞回曲线、刚度退化曲线以及等效黏滞阻尼比曲线。研究表明:高强钢筋和高强混凝土T形柱和L形柱的滞回曲线下降段较陡且延性较差;增加配箍率可以改善T形柱和L形柱试件的破坏特征和试件的滞回特性,增加T形柱和L形柱试件的耗能能力。For the effect of stirrup ratios on damage characteristic, hysteretie characteristic, rigidity degradation, ductility performance, energy dissipation capacity of T-shaped and L-shaped columns, through quasi-static test method , four concrete specially shaped columns, high strength steel bars were tested under low cyclic loading. The component failure characteristics and ductility performance were analyzed, hysteresis curves and stiffness degradation curves and equivalent viscous damping coefficient curves were also plotted. The results show that descending parts of the hysteresis loops of specially shaped columns, high strength steel bars and concrete are steeper and the ductility was also worse. The damage characteristic and the hysteretie characteristic of specimens were improved with the increase of stirrup ratios. The energy dissipation capacity of T-shaped column and l,-shaped column were also enhanced with the increase of stirrup ratios.
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.15