某高速冲床润滑系统环境适应性研究  

Environmental suitability research on lubrication system of some kind of high-speed punch

作　　者：张根保[1] 孙晓丁[1] 鞠萍华[1] 张会杰[1] 程岩松[2] 

机构地区：[1]重庆大学机械工程学院,重庆400044 [2]重庆工商职业学院,重庆400052

出　　处：《锻压技术》2013年第3期85-89,共5页Forging & Stamping Technology

基　　金：国家自然科学基金资助项目(51175527);国家自然科学基金资助项目(50835008);国家科技重大专项"高档数控机床与基础制造装备"资助项目(2010ZX04014-015;2011ZX04003-031;2012ZX04011-031);重庆市教委资助项目(KJ121602)

摘　　要：为了定量分析高速冲床的环境适应性,选择其润滑系统为研究对象。将润滑系统分为12个子单元,分别对应一种故障模式。首先对系统进行故障模式分析,然后采用风险优先数(RPN)方法,依据评分准则对概率等级打分,得出润滑系统的故障模式危害度分析结果。引入实际环境影响因数e,在FMECA分析的基础上,得出系统各单元的环境危害度E,以此表征其环境适应性。结果表明:过滤器和分油器单元的环境适应性最差,应当重点改进。In order to quantitatively analyze the environmental suitability of high speed punch, the lubrication system was chosen as the research object. The lubrication system was divided into twelve units, each corresponding to a failure mode, and the system failure modes were analyzed first. Then based on the marking criterion, the risk priority number （RPN） method was adopted, so the failure mode criticality analysis of lubrication system was obtained. The actual en- vironmental impact factor e was introduced, and based on FMECA results, environmental damage index E of each units was obtained, and it was used to characterize the environmental suitability. Research shows that the percolator and the oil distributor have the poorest environmental suitability, and should be improved first.

关 键 词：高速冲床 运行可靠性 环境适应性 FMECA环境危害度 

分 类 号：TG385.1[金属学及工艺—金属压力加工]