基于AMESIM的注塑机管道设计的节能研究  

Energy Conversation Research of the Pipeline Design of Plastic Injection Molding Machine based on AMESIM

作　　者：杨超[1] 宋春华[1] 韦兴平[1] 刘小利 宋昌林[1] 

机构地区：[1]西华大学机械工程学院,四川成都610039 [2]重庆市工业技师学院,重庆永川402160

出　　处：《塑料工业》2013年第6期51-53,59,共4页China Plastics Industry

基　　金：四川省科技厅项目(2010JY0117);西华大学人才引进项目(Z1020211)

摘　　要：利用AMESIM软件对SZ-250A型注塑机合模系统进行了建模,通过对管道长度和直径设置不同参数进行了仿真和分析。通过对大小流量泵输出能耗的计算表明:随着管道长度的增大,注塑机能耗增大;随着管道直径的增大,注塑机能耗减小。并对注塑机在不同管道长度和直径下的压力损失和响应速度进行了分析。AMESIM software was used to make a model of clamping system of SZ-250A-type injection molding machine. Simulation and analysis were made by setting different parameters of the pipe length and diameter. The calculation of the output energy consumption of the big and small flow pumps showed that with the increasing of the pipe length, the energy consumption of the injection molding machine increased; with the increasing of the pipe diameter, the energy consumption of the injection molding machine reduced. The pressure loss and response speed were analyzed under the different pipe length and diameter of injection molding machine.

关 键 词：AMESIM 注塑机 节能 

分 类 号：TQ320.5[化学工程—合成树脂塑料工业]