注塑工艺对PC/ABS合金电镀性能的影响研究  

Study on Effect of Injection Process on Electroplating Property of PC/ABS Alloy

作　　者：周中玉 柏莲桂 汪洋 吴文俊 李强 李文强 罗明华 

机构地区：[1]上海锦湖日丽塑料有限公司,上海201107 [2]上海延康汽车零部件有限公司,上海201800

出　　处：《塑料工业》2013年第6期117-119,共3页China Plastics Industry

摘　　要：对聚碳酸酯(PC)/丙烯腈-丁二烯-苯乙烯(ABS)合金采用使用不同的注塑工艺注塑后电镀。研究了注塑工艺对PC/ABS合金粗化性能和镀层结合力的影响。结果表明:注塑工艺对PC/ABS合金的粗化性能和镀层结合力影响较大,注塑温度过低、压力和速度过高以及模具温度过低都会降低PC/ABS合金的粗化性能和镀层结合力。Different injection process was used on PC/ABS fbr electric plating, the ettect oi lnjecuon process on etches property and plating peel force of I~/ABS was investigated. It showed that there was a great effect of injection process on etch property and plating peel force of pC/ABS. Too low injection temperature, too high injection pressure and speed, too low mold temperature could reduce etch property and plating peel force of PC/ABS.

关 键 词：聚碳酸酯 丙烯腈-丁二烯-苯乙烯 注塑工艺 粗化 镀层结合力 

分 类 号：TQ323.41[化学工程—合成树脂塑料工业]