Time Series as an Aid to Research of Traction Substation Load  

作　　者：Andrzej Kobielski Stawomir Drapik Marek Dudzik Janusz Prusak 

机构地区：[1]Institute of Rail Vehicles, Cracow University of Technology, Cracow 31-155, Poland [2]ZUE S.A. Kazimierza Czapihskiego 3 st, Cracow 30-048, Poland [3]Traction and Traffic Control Division, Cracow University of Technology, Cracow 31-155, Poland

出　　处：《Journal of Energy and Power Engineering》2013年第5期979-986,共8页能源与动力工程（美国大卫英文）

摘　　要：In the case of electric or tram traction vehicles, the energy for propulsion purposes, as well as all other purposes, is processed and delivered via traction substations. Knowledge of the course of traction substation loading, especially at the stage of its design, is an extremely important issue because of the choice of the processing equipment of the main circuit or protection devices. In the range of investigations of railway traction substation B in vicinity of Cracow （Poland）, the measurements of current load in hours 4：00 a.m.-8：00 p.m. were realized. The measurements for the analysis were chosen from those realized between 6：00 a.m.-8：00 a.m. （the morning rush time）. Due to the sampling of 2 h summit with a frequency of 2 kHz, the recorded data set contains 1.44 ~ 107 elements. Therefore, the necessary transformation of data was to lower frequency 1 Hz, 10 Hz and 50 Hz. The results of the analysis presented below indicate the effect of such conduct on the obtained results for the parameters of time series models. In view of the unsatisfactory effects of the polynomial approximation, there is a need to seek a more efficient approximation method for achieving the optimum compatibility with the measured process. Continued research should lead to the formulation of procedures, which will determine an acceptable accuracy of the expected variability of traction substation loads.

关 键 词：Electric traction CURRENT traction load railway traction substation time series. 

分 类 号：O211.61[理学—概率论与数理统计] U224[理学—数学]