检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:李文敏[1]
机构地区:[1]安徽理工大学能源与安全学院,安徽淮南232001
出 处:《矿业工程研究》2013年第2期37-41,共5页Mineral Engineering Research
基 金:国家自然科学基金资助项目(51074003;51074005);国家自然科学基金委员会与神华集团有限公司联合资助项目(51174255);安徽省优秀青年科技基金资助项目(10040606Y31);中国博士后科学基金资助项目(2011M501037)
摘 要:采用某受承压水威胁工作面的具体工程地质资料,利用FLAC3D软件强大的流固耦合功能,建立该带压开采工作面的数值分析模型并进行流固耦合数值模拟.通过数值模拟,分析不同推进长度时煤层底板隔水层内岩体的位移、应力分布规律及含水层承压水在隔水层中的导升高度.数值模拟结合"下三带"理论,判断在承压水作用下,底板内是否存在完整隔水层,以判断工作面在采煤过程中是否会发生突水事故.对承压水上采煤的流耦合数值模拟具有一定的参考作用.In combination with the specific engineering geological conditions of some mining face which is under the threat of confined water mining, this paper uses the powerful fluid - solid coupling function of FLAC^3D software to have a fluidsolid coupling numerical simulation on the mining face. It analyzes the coal floor rock strata in mining process displacement, stress and pore water pressure variation rules and the coal floor that the failure characteristics. And it is combined with the three zones theory to judge whether the work face will water bursting or not, which have certain reference function coal to above water fluid - structure coupling numerical simulation .
关 键 词:流固耦合 带压开采 “下三带”理论 底板破坏特征
分 类 号:TD74[矿业工程—矿井通风与安全]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.147