检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:欧阳斌林[1] 东忠阁[1] 初永良[1] 梁冬梅[1]
机构地区:[1]东北农业大学电气与信息学院,哈尔滨150030
出 处:《传感技术学报》2013年第4期481-486,共6页Chinese Journal of Sensors and Actuators
摘 要:介绍一种空心互感式位移传感器,其工作原理是采用开关方式,以恒流源双向向空心互感的原边线圈充放电,采样副边线圈在稳定放电期间的窄脉冲高度来测量位移量,量程可达20 mm,相对精度为2%。论述了互感值的测量,分别设计了轴向和径向两个位移的试验及捕获采样数据的电路,从数据分析证明该方法可以测量位移,减少了空心线圈中的干扰对测量的影响,轴向位移还可以直接测量电介质材料的厚度。A kind of air-core mutual-inductance displacement sensor is introduced,and the switching mode is adopted as its operating principle.The primary winding of the air-core mutual-inductor is charged and discharged bi-directionally with a constant current circuit.Displacements are measured by sampling the secondary winding based on height of narrow pulses during stable discharging periods.The measure range can reach 20 mm and the relative precision is 2%.The method of mutual-inductance measurement is demonstrated,for which two tests of axial and radial displacements and the circuit for capturing sampled data are designed respectively.Through data analysis,the method is proven available to measure displacement and reduce the interference of air core coil to measurement.The axial displacement can also be used to measure directly the thickness of dielectric substances.
关 键 词:位移传感器 空心线圈 互感测量 开关电感 脉冲电平采样
分 类 号:TM934.43[电气工程—电力电子与电力传动] TM930.1
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.145