稻麦联合收割机二次切割装置研究设计  

Study on the Second Cutter for Rice-Wheat Combine Harvester

作　　者：陈霓[1] 李永斌[1] 

机构地区：[1]金华职业技术学院,浙江金华321007

出　　处：《金华职业技术学院学报》2013年第3期41-43,共3页Journal of Jinhua Polytechnic

基　　金：浙江省自然科学基金资助项目(项目编号Y1110647)

摘　　要：随着稻麦产量的提高全喂入联合收割机的脱粒滚筒负荷不断增大,提高割茬收割带来的土地整理问题日渐突现。听过相关参数的选用和计算设计了二次切割装置并对样机进行了田间试验和测定分析,结果表明:作物经二次切割实现"分向输送"后,脱粒功耗下降了5.4 kW,占原脱粒功耗的36.73%;割茬缩短了约50%,达到了农艺要求。二次切割技术的应用提高了全喂入联合收割机整机技术水平。As Rice-Wheat output improves the threshing load increases. Land Arrangement brought on cut stubble is increasingl The second cutter is designe y prominent. Through the selection of relevant parameters and calculations, d and the prototype is performed field trials and Measurement and analysis. The results show that after Rice - Wheat is conveyed in two ways by second cutter, threshing power consumption decrease of 5.4kW accounting for 36.73% of the original shortened by about 50%, which reaches the agronomic requirements. The technology improves the technology of full-feeding combine harvester consumption and stubble is Application of second cutting

关 键 词：联合收割机 全喂入 二次切割装置 研究 

分 类 号：S225[农业科学—农业机械化工程]